Practical EHS Tips, News & Advice. Updated Daily.

In our latest installment of Ask the Expert, brought to you by the team of industry experts at EHS Hero®, we look at a recent question from a subscriber asking about elementary neutralization. See what the experts had to say.

Q: For elementary neutralization, can potassium hydroxide be pumped into a 55-gallon drum, transported to the accumulation area, then later be moved to another part of the facility and treated with phosphoric acid to lower the pH to a range of 7-9?

Complete question: To qualify for elementary neutralization, can potassium hydroxide be pumped out of equipment into a 55-gallon drum, transported to the central accumulation area (CAA) and be treated as hazardous waste, then later removed from the CAA and pumped into a 300-gallon tote located in another part of the facility than where the waste was generated to be treated with phosphoric acid and lower the pH to a range of 7-9? What pH or end point is considered neutralized for the EPA?

Answer: After it is generated at your facility and placed in a 55-gallon drum, your potassium hydroxide can be transported to the facility’s CAA and managed as a hazardous waste and later moved to another part of the facility and pumped into a 300-gallon tote and treated in accordance with the elementary neutralization requirements provided specific conditions are met. [You mentioned in your question that the potassium hydroxide would be “treated” in the CAA, but I believe you meant “managed” as you described it being later treated later with phosphoric acid in another part of the facility in order to lower the pH to a range of 7 to 9 pH.]

As you know, the elementary neutralization process is used for neutralizing wastes that are hazardous only because they exhibit the corrosivity characteristic or, alternatively, because they are wastes listed as hazardous in Subpart D of 40 CFR 261 for this reason (of which there are very few). Although technically a hazardous waste treatment process, the elementary neutralization process is exempt from requiring a hazardous waste treatment permit pursuant to 40 CFR 270.1(c)(2)(v).

Neutralization is a chemical process used on corrosive hazardous waste to adjust the pH level of the corrosive waste so that it no longer meets the RCRA definition of corrosive which is defined in 40 CFR 261.22 as:

Once the waste is neutralized, the hazard of corrosivity no longer exists. If the waste is aqueous, once the pH is more than 2 but less than 12.5 the federal regulations would consider the waste to be neutralized.

While the potassium hydroxide is in a 55-gallon drum located in the CAA the container must be in compliance with the regulations regarding management of containers in a CAA, including the container labeling requirements (e.g., marking the beginning date of accumulation) and keeping the container closed except when adding or removing the waste. You must count the waste stored in containers in the CAA toward your monthly generator status. Because you are not neutralizing the waste immediately upon generation (as is typically done), you should check with your state environmental regulatory agency as to whether the potassium hydroxide must be neutralized and removed from your facility before the applicable generator accumulation period for the CAA is reached.

The tote in which you plan to treat the potassium hydroxide must meet the definition of “elementary neutralization unit” (ENU) as defined at 40 CFR 260.10. An ENU is not subject to the hazardous waste management regulations. However, any wastes generated from the neutralization process are fully subject to all applicable federal, state, and local regulations. Note that before being land-disposed, neutralized waste may require further treatment in accordance with the federal land disposal restrictions at 40 CFR 268. In addition, If the pH range is reduced to between 5.5 and 9.5, it’s very possible that the treated waste can be disposed of through a sanitary sewer system provided the potassium hydroxide waste was characteristic for corrosivity and not a listed waste. Check with your state environmental regulatory agency to confirm. If your waste was a listed hazardous waste, it would still need to be handled and disposed of in the same manner as the original hazardous waste regardless of whether a hazard still exists.

The Hazard Communication Standard (HCS) requires pictograms on labels to alert users of the chemical hazards to which they may be exposed. Each pictogram consists of a symbol on a white background framed within a red border and represents a distinct hazard(s). The pictogram on the label is determined by the chemical hazard classification.

Do your employees know how to handle hazardous materials safely? Here are 11 basic rules all employees who handle hazardous materials should know and follow.

Why reinvent the wheel when there are so many ready-made safety observances to link up to? The National Safety Council (NSC) publishes an annual list of safety meeting topics. Here are some highlights.

In this whitepaper, Origami Risk explores the question “What contributes to the success of EHS professionals as they strive to advance safety culture and improve workplace safety?” Based on the primary interviews, secondary research, and the results of Origami’s EHS maturity assessment, we help EHS professionals get a glimpse into: Common challenges EHS professionals must […]

In our “Moving the Needle: Employee Upskilling in the Modern Workforce” report, nearly 400 executives, directors, managers, and professionals from the human resources and environmental health and safety (EHS) industries responded during March 2022 and weighed in on the presence of upskilling and training programs in their workplace. With this closer look, we aim to […]

A hazard analysis employs various techniques to identify possible job or task-related risks before they occur. It involves analyzing every stakeholder or component for a particular task – the workers, the machines or tools, the working environment, and the task itself. The core objective of this practice is not just identifying existing hazards, but also […]

Ready, Set, Go: Are You Leading the ESG Reporting Race? is a survey from SAI360 and EHS Daily Advisor that was launched in November 2021. It gathered the insight of 352 environment, health, and safety (EHS) professionals globally about how organizations perceive ESG and sustainability, where they stand on implementing these efforts, and what their […]

Are you an environment, health, and safety (EHS) professional with something to contribute to your professional community? If so, we want to hear from you! As we build the EHS Daily Advisor community, we are looking for professionals, managers, and executives to be a part of our Faces of EHS profile series as well as contribute thoughtful content that can help our colleagues in the field with their compliance and cultural efforts. Learn more!

The mission of EHS On Tap is to provide clear, relevant, actionable information on topics that matter to EHS professionals in podcast form through engaging and insightful interviews with experts and thought leaders. Listen to the latest and subscribe!